Recent content by Beer Buddah

I found the forum page. Just got stuck on that main page. Cheers

I looked at that page. Cannot see forum posts and paying 15£ for something I cannot see. Talks about 2012 comp on front page !

I'm gonna try first decoction mash on thursaday. Any advice gratefully recieved and this is the recipe i borrowed from net if anyone has any taughts that would be great. Local store has no dark munich or carafa two so i have carafa 3 and normal munich will this be a bad choice? Dunkelweizen...

I'm also loving the fact that in nearly 4 hrs the fridge has not increased even .1 degree. Stc perfect at 3.0 deg.

I made the door smaller so less chance of air leaking. I can hold up to 12 kegs or 3-4 corpses ! I still have to move the compressor ect but I'm good as is. Also need to do some cosmetic work...set up taps. Do more tomorrow. Fairly cheap project once you get a free fridge. No more yeast in...

It's spot on temp now. Insulation should save electricity.

It's the team work ! Guidance from you guys. It's working great

Cooling grid same procedure to upgrade insulation. More picks when completed

Compressor will be moved away from fridge backing carefully ! Insulation fitted and compressor replaced.

I'm thinking it might work Fin as compressor is still in original position I misunderstood your reply.

1. I will test that theory for us. It did work fine for a day before it iced up again. 2. Your right I'm not gonna insulate the back of fridge evaporation grid. As the fridge has basically the least insulation I'm gonna remove grid and compressor, insulate fridge backing then fit grid ...

So I removed most of the fridge there is only the back part remaining. I sealed everything up and I have more room now. As suggested I mounted freezer plate on top of kegerator. I have some work to do on the door before I test it. I'm also gonna add insulation to back of the fridge panel as I...

So I discovered there is a gap under fridge that I did not fill in as seen by screw driver. When I installed the fans it basically blasted cold air out of the kegerator so that's why temperature increased.

Frustrating when there is no reply just hang in there. Not everyone has the answers.

Oat Husks Quick Overview To improve the filter bed of the mash to decrease the likelihood of a stuck mash. Non fermentable, but they can be useful in the mash. The hulls provide bulk and help prevent the mash from settling and becoming stuck during the sparge. This can be very helpful when...