Asda Eden Falls question

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

foxbat

Landlord.
Joined
Nov 24, 2013
Messages
3,266
Reaction score
2,464
Location
Essex, UK
My next recipe is going to consist of Pilsner/Carapils malts with Perle, Hallertauer Hersbrucker and Celeia hops with US-05 yeast and a target ABV of 4.2%. The idea is to create a pale ale with a large slug of continental hop flavours.

My question is, can I use Eden Falls water straight out of the bottle in a pale ale like this or does it benefit from some treatment to get the best out of this style of ale?
 
Yes you can use it straight out of the bottle. I've used this water numerous amount of times for pale ales. I understand it benefits from some gypsum (not sure how much as I never added any) but you dont HAVE to add any
 
My next recipe is going to consist of Pilsner/Carapils malts with Perle, Hallertauer Hersbrucker and Celeia hops with US-05 yeast and a target ABV of 4.2%. The idea is to create a pale ale with a large slug of continental hop flavours.

My question is, can I use Eden Falls water straight out of the bottle in a pale ale like this or does it benefit from some treatment to get the best out of this style of ale?

I've used nothing but chase spring water (17p for 2 litres at lidl or tesco) since taking up brewing and it's worked well for me in a range of styles from pales to dark beers.

That's not to say as myqul has already pointed out that you can't add to it, just that i've not felt the need to having been more than pleased with my results. :thumb:
 
Thanks, I'll try Eden Falls straight from the bottle and see how it goes. I've used Sainsbury's Basics in the past with CRS added because it's rather alkaline and a teaspoon of gypsum for style. The results were good but this time I'd like to try something different for comparison purposes if nothing else.
 
You might want to still add 10grm Gypsum to bring out the hop flavours (and one teaspoon calcium chloride since Calcium, suphates and chloride are all quite low basis an analysis I saw from 2014) assuming a 5 gallon batch size.
 
I've been using tap water with half a Camden tablet and tried bottled water and can't tell the difference. I'm in Manchester and our water tastes ok out of the tap though.
 
Tap water where I am in north essex is very hard and alkaline. We have an under-sink filter that makes it taste OK and means we can brew tea that doesn't taste horrible. The filter does nothing for the alkalinity though and I still have to add loads of CRS to bring it down to usable levels before using it for beer brewing.
 
Thanks, I'll try Eden Falls straight from the bottle and see how it goes. I've used Sainsbury's Basics in the past with CRS added because it's rather alkaline and a teaspoon of gypsum for style. The results were good but this time I'd like to try something different for comparison purposes if nothing else.

tesco's ashbeck is ph 6.2 but in south wales it's hard to get, when in chesterfield this week I picked up a few 5l bottles for £1.10 as opposed to £1.30 for 6x500ml bottles. I had a few strange looks at the checkout :lol:
 
I've been using tap water with half a Camden tablet and tried bottled water and can't tell the difference. I'm in Manchester and our water tastes ok out of the tap though.

Hi Chris just seen your in denton, bit weird I'm just up the road in Glossop but work in denton as a sparky. We're on a different water supply but won't be much different, I use campden tabs and also tweak using strange Steve's water treatment thread.
 
Tap water where I am in north essex is very hard and alkaline. We have an under-sink filter that makes it taste OK and means we can brew tea that doesn't taste horrible. The filter does nothing for the alkalinity though and I still have to add loads of CRS to bring it down to usable levels before using it for beer brewing.
I'm the same in Epsom...Alkalinity 270-280ppm so need 1.4ml CRS per litre brewing liquor and you can see the CO2 come out of solution as it heats up.
If I were going to brew a lager I'd have to buy Ashbeck or Eden Falls.
 
The mineral breakdown for Eden Falls is on Asda's website. Plugging those numbers into the Brewer's Friend water treatment calculator shows that no additions are required for a Pilsner profile so I'm going to go with that.
 
Just looked at Asda site and re-checked with Graham Wheeler water model and it only suggest 1.5gramm each Gypsum and Ca Chloride for his lager profile assuming 25ltr brewing liquor....ie pretty well nothing so using neat Asda Edens Falls with no addition should be fine. I'm half tempted to have a go at a lager this winter using neat Eden Falls. Let us know how it turns out.
 
tesco's ashbeck is ph 6.2 but in south wales it's hard to get, when in chesterfield this week I picked up a few 5l bottles for �£1.10 as opposed to �£1.30 for 6x500ml bottles. I had a few strange looks at the checkout :lol:

I do the same. I got asked by someone who knows me whether I was preparing for the apocalypse! I only had around 35 litres... :)
 

Latest posts

Back
Top