• If you have bought, sold or gained information from our Classifieds, please donate to The Homebrew Forum and give back.

    You can become a Supporting Member or just click here to donate.

Brew Kit for Sale

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jceg316

Landlord.
Joined
Sep 8, 2014
Messages
2,811
Reaction score
1,161
I'm selling my brew kit which contains:

-56 litre stainless steel boiler
-42 litre mash tun (rubber maid type cooler) including SS false bottom
-SS immersion chiller
-loads of connectors, taps, joints, spare parts, hose barbs etc.
-about 5 sets of camlocks.

I've had the kettle for around 2-3 years and used it a lot, it's in a usable state but it needs a clean. It has 2 x 2.4kw elements in, one of them isn't usable as one of the pins is broken. However I do have a spare element I will include.

The mash tun is an orange cooler with a ball valve tap and false bottom. This is relatively new and only been used two or three times.

I have spare parts I'll include, including male and female camlock sets. These parts are of varying states, some are good as new others are a bit dirty, but soaking them in coke or something overnight will brighten them up.

I will also include a Pico Electrim brew controller, however this is broken. It needs a new female IEC connector which is replaceable if you know what you're doing, however I'm listing that item as broken.

I'll take some photos and put them up soon.

I'm based in Orpington so you can come and collect or I can look into postage. I'm looking for £350 for this setup, not including postage. Would prefer payment by Paypal or cash on collection.

Reason for sale is I moved house, not as much space for this kit and so I had to downsize and got myself a Grainfather. I did use this as a HERMS but the pump is broken and long gone.

Do get in touch if you're interested.
 
I took some pictures of everything. I'm gonna have to add them all in different posts due to the number of photos.

Here's the kettle. It has a sight glass, temp gauge, ball valve, thermowell and the 2 elements. There is also a hole the other site but I have plugged that and it's watertight. Pictures show the outside, the pins of the not so good element, the pins of the good element and the inside. The element on the right is the dodgy one. I've only ever used one element at a time.

2017-07-08 13.22.17.jpg


2017-07-08 13.22.55.jpg


2017-07-08 13.23.15.jpg


2017-07-08 13.23.36.jpg
 
Mash tun. Has a tap and false bottom. Images show outside and inside. The false bottom fixes in with a hose barb and small amount of tubing.

2017-07-08 13.47.26.jpg


2017-07-08 13.47.56.jpg


2017-07-08 13.48.08.jpg
 
Stainless steel wort chiller. Needs a bit of clean these stains come off with washing up liquid and a sponge.

2017-07-08 13.49.05.jpg


2017-07-08 13.49.20.jpg
 
These are the other bits and bobs. Not included are the bottle caps or junk mail. There's part of a bleeder valve I made for a pump. This includes a bunch of different types of joints, a couple of ball valves and a hose barb and camlock. This can be taken apart but might need a bit of elbow grease to do so.

There's some cleaner for SS pots which I'll throw in. a filter for the kettle, and a bag filled with other copper and SS joints, parts, ball valve taps, camlocks etc.

The spare element is a bit rusty so this will need to be cleaned.

Let me know if you have any questions or want a specific picture of something.

2017-07-08 14.01.07.jpg


2017-07-08 14.01.17.jpg


2017-07-08 14.01.35.jpg


2017-07-08 14.01.47.jpg


2017-07-08 14.02.04.jpg
 
Back
Top