Register Now!
The HomeBrew Forum > Beer Brewing Talk > General Beer Brewing Equipment Discussion > Nylon Composite Pluto Beer Gun

Help Support The Homebrew Forum by donating using the link above or becoming a Supporting Member.
Thread Tools Display Modes
Old 06-12-2017, 03:20 AM   #1
Senior Member
Join Date: Nov 2012
Posts: 288
Liked 6 Times on 5 Posts

Default Nylon Composite Pluto Beer Gun

In process now of trying to arrange Corny Keg system for my home brewing.
I am not the most confident of persons when it comes to this and would like to know exactly what I need as knowing myseld I'll forget something or order something I dont need.
I have sourced a local supplier of C02 which after the initial high cost for deposit for cylinder etc should be fine.
Its a 10L cylinder and some folk on here say that should last around 50 brews. Which minimum must be 2 or 3 years yes?
Its going to be served from a fridge under the stairs so dont need fancy faunts. I was.just going to go down the picnic tap route but have come across a product. Nylon composite pluto beer gun around £14. Are these any good?
So what size and length of tubing would i need to fit this gun and onto keg for best pouring results.
I plan to run 2 kegs how does this work line wise and regulator wise. What do i need.
When drinking can i say pour pint lager disconnect. Then put on other corny and pour an ale?
Ive heard of split lines etc ?
So exact list andapprox.costs of exactly what i need(including any cheaper but adequate ebay alternatives) for 2 corny keg system.
Do i need.certain lengths of 3/8 & 3 /16 line? Does one fit into other?
Also whats better going for barbed or threaded etc ty
mancer62 is offline  
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
nylon bags for hops reusable? Fred777 General Beer Brewing Discussion 3 08-09-2013 07:29 PM
nylon/polyester hop bag bob3000 General Beer Brewing Discussion 3 11-07-2011 07:23 PM
cleaning nylon bags tezerh General Beer Brewing Discussion 5 27-06-2011 08:28 AM
Fine or course nylon bags QED General Beer Brewing Equipment Discussion 4 18-04-2010 07:30 AM
Beer Smith, Beer Tools, Pro mash, Beer Engine? dandan General Beer Brewing Discussion 14 21-07-2009 05:16 PM

Newest Threads