Hands free bottle filling with a Nukatap counter pressure filler - the complicated method

[MikeB.]

Ah, that makes sense, thanks for clarifying.

 

[Agentgonzo]

First an AIR gap appears as the filling straw is removed

If you give the bottle a little swirl, it'll foam up, pushing the air out. You can then quickly seal the cap on the bottle.

 

[Buffers brewery]

If you give the bottle a little swirl, it'll foam up, pushing the air out. You can then quickly seal the cap on the bottle.

I opted to put a puff of gas into the bottle neck before capping.

 

[RichardM]

Look what I made. Keith, @Buffers brewery made printed parts for me and supplied the lifting mechanism and some guidance notes. I made the wooden parts and assembled it
It's a bit wonky, but it works.
Thanks @Buffers brewery .

 

[Buffers brewery]

Look what I made. Keith, @Buffers brewery made printed parts for me and supplied the lifting mechanism and some guidance notes. I made the wooden parts and assembled it
It's a bit wonky, but it works.
Thanks @Buffers brewery .
View attachment 90569

Good to hear it all works and frees up three of your four hands .