Aliexpress bargains

[BeerCat]

I thought i would start a thread dedicated to bargains i have found on aliexpress.com . I have come across rather a lot so thought i would try and post in one thread.

A cheap BIAB bag https://www.aliexpress.com/item/5-g...0219-4fe2-b9f5-bfb1181115cf&priceBeautifyAB=0

Spring loaded bottle filler https://www.aliexpress.com/item/New...b326-4b41-8f1d-062cb00a4003&priceBeautifyAB=0

 

[BeerCat]

A TDS Meter at £2.66 inc post https://www.aliexpress.com/item/Hig...781753767.html?spm=2114.search0104.0.0.SscEXK

 

[BeerCat]

A decent looking thermowell for top mounting in an FV £6.70 https://www.aliexpress.com/item/Sil...5c04-4cf7-a16d-b2ae32be4f26&priceBeautifyAB=0

 

[Chippy_Tea]

I like the look of the stainless bottle filler i may have to get one of those to replace my plastic one.

 

[foxbat]

I like the look of the stainless bottle filler i may have to get one of those to replace my plastic one.

They are nice looking but a bit hard to see if you get any mould spots growing inside.

 

[Chippy_Tea]

To be honest i haven't checked the spring end of mine in all the months i have been using it i run steriliser through it when i have finished bottling and have never had an issue.

 

[Saisonator]

Chippy I was thinking the same, looks a nice bit of kit.
The plastic ones look like they are always ready to fail.

 

[foxbat]

To be honest i haven't checked the spring end of mine in all the months i have been using it i run steriliser through it when i have finished bottling and have never had an issue.

It's really the long thin opaque tube I was thinking about. Maybe it could be scrubbed with a pipe cleaner?

 

[LarryF]

I like the look of the stainless bottle filler i may have to get one of those to replace my plastic one.

I'm wondering how I'd fit that to the tap on my FV or would I need a replacement tap compatible with it.? If so could I fit that to a plastic FV?

 

[Chippy_Tea]

Chippy I was thinking the same, looks a nice bit of kit.
The plastic ones look like they are always ready to fail.

I use my little bottler on the end of a Syphon tube and it's a bit of a pain to get the flow started then shove the tube into the Syphon pipe I like the look of the end of this tubes adaptor as it looks a bit smaller diameter at the smallest end.

 

[Saisonator]

You need a small piece of silicon tube inbetween, I do that with my little bottler anyway so I can tilt the FV to get the last beer out.


That was for LarryF
I don't know why his post is not being quoted even though I highlighted 'quote' on his post? :shrug:

 

[LarryF]

You need a small piece of silicon tube inbetween, I do that with my little bottler anyway so I can tilt the FV to get the last beer out.


That was for LarryF
I don't know why his post is not being quoted even though I highlighted 'quote' on his post? :shrug:

Got it Chippy, Cheers.:

 

[Chippy_Tea]

It wasn't me.

 

[BeerCat]

5Pcs 160 Mesh Nylon Strainer Filter Bag £2.33 https://www.aliexpress.com/item/5Pc...56ba-4970-b465-db43c681b0bc&priceBeautifyAB=0

 

[BeerCat]

Stainless Steel Homebrew Carbonation Cap £4.71 https://www.aliexpress.com/item/Sta...6359-4f4b-897f-dc099c93ac2b&priceBeautifyAB=0

 

[Ben034]

I was interested in the steel bottling wand but when I put UK into shipping destination it states cannot be shipped to this area. Anyone see different?

 

[Bigcol49]

Hi!
Carbonation cap with hose barb for counter pressure bottle filling - £5.73 here.

 

[IainM]

Hi!
Carbonation cap with hose barb for counter pressure bottle filling - £5.73 here.

Oooh. Just got one. :laugh2:

 

[sdt7618]

Wonder what difference the hose barb would make on this one, possibley allow the C)2, to be bottom fed via a length of hose

https://www.amazon.co.uk/dp/B01NB0FP0N/?tag=skimlinks_replacement-20

 

[Wilfy]

Beergun

https://m.aliexpress.com/s/item/32762807415.html?spm=a2g0n.search-cache.0.0.7b763656kFLwYu