Sessionable Table Beer

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BrannBrew

Damo Brann
Joined
Jul 22, 2015
Messages
303
Reaction score
71
Location
Horndean
After having 1 too many mid strength (5.5% beers) over the weekend I'm certainly thinking about making a more session/table beer. Current plan is around 3%. I've yet to listen to basic brewing's podcast on the subject of low beers but have read Mad Fermenterlists recipes and points on it.
The following is basic outline
STATS:
Original Gravity: 1.033
Final Gravity: 1.008
ABV (standard): 3.23%
IBU (tinseth): 35.88
SRM (morey): 3.81
Mash pH: 5.65

FERMENTABLES:
800 g - United Kingdom - Maris Otter Pale (25.8%)
350 g - American - Rye (11.3%)
200 g - American - Munich - Light 10L (6.5%)
800 g - United Kingdom - Golden Promise (25.8%)
500 g - United Kingdom - Malted Naked Oats (16.1%)
250 g - Lactose (Milk Sugar) - (late addition) (8.1%)
200 g - American - Carapils (Dextrine Malt) (6.5%)

HOPS:
15 g - Citra, Type: Pellet, AA: 11, Use: Boil for 10 min, IBU: 9.2
10 g - Vic Secret, Type: Pellet, AA: 15.5, Use: Boil for 10 min, IBU: 8.64
21 g - Engima, Type: Pellet, AA: 15.4, Use: Boil for 10 min, IBU: 18.04
42 g - Citra, Type: Pellet, AA: 11, Use: Boil for 0 min
41 g - Vic Secret, Type: Pellet, AA: 15.5, Use: Boil for 0 min
41 g - Enigma, Type: Pellet, AA: 15.4, Use: Boil for 0 min
15 g - Citra, Type: Pellet, AA: 11, Use: Dry Hop for 7 days
15 g - Vic Secret, Type: Pellet, AA: 15.5, Use: Dry Hop for 7 days
15 g - Engima, Type: Pellet, AA: 15.4, Use: Dry Hop for 7 days
20 g - Citra, Type: Pellet, AA: 11, Use: Dry Hop for 3 days
20 g - Vic Secret, Type: Pellet, AA: 15.5, Use: Dry Hop for 3 days
20 g - Enigma, Type: Pellet, AA: 15.4, Use: Dry Hop for 3 days

Still struggling with a name, and abit uncertain if the malt bill will provide enough backbone.
 
FG of 1.008 seems a bit low given the addition of lactose? Is this a software prediction?
 
Ben is right, add the lactose post fermentation if you want actually want to hit ~1.008.

IMO, you're polishing a turd by trying to introduce body into a low ABV pale beer. My experience of keto and low ABV beers has been a poor compromise at best. They are thin and dry. "Alcohol free" beers as also the same in terms of being a poor compromise, I'd rather have a glass of orange juice. If you don't want to get hammered, just drink less:laugh8: Seems like you're almost opting for quantity over quality?

I find it confusing why you've failed to mention mash temperature which is arguably the most critical parameter for determining body...
 
Ben is right, add the lactose post fermentation if you want actually want to hit ~1.008.

IMO, you're polishing a turd by trying to introduce body into a low ABV pale beer.

I find it confusing why you've failed to mention mash temperature which is arguably the most critical parameter for determining body...
Sorry I only quickly copied the 'ingredients' mash temp 68c for 40min.
 
Sorry I only quickly copied the 'ingredients' mash temp 68c for 40min.
68C is a good temp for a full bodied beer. But getting to 1.008 from that mash temperature is extremely optimistic. That's without considering the lactose too.
 
I would have thought with the lactose and 68c mash temp (depending on yeast but assuming your using something like US-05) you would be looking at more like 1012-1014 (as a guess) for the FG.

I think getting a lower ABV beer right is a skill whether it's a mild (which I don't have much experience with) or a hoppy beer (in this area, Kernel Table Beer at 3% is a nice example).

I would maybe consider swapping out the Munich with oats as the Marris otter should be good on its own and oats will add some more body. Also, try to carb to a lower level than usual as the fizz can make the beer taste "thinner."

Also, I've never tried lactose in this type of beer but if using, I would start with a small amount or consider removing. Others may have had success with this though, so maybe can advise accordingly.
 
Thanks Ben. I was just thinking about dropping the lactose, I only included it as I found it in the bread bin in the garage pegged up. But was having second thoughts as it's been opened since November, just clipped closed using one of those sandwitch clips.

In CAMRA's home brewing essential book there is a recipe for 3.8% which I thought to use the basic recipe and change the hops but wanted this time to try to create something of my own as I've done 2 brews out the book recently.
I was going to use us-05 and had good success recently reaching around 90% AA. Although I obviously wouldn't get that high with mashing hotter.
 
BrannBrew said:
I was going to use us-05 and had good success recently reaching around 90% AA. Although I obviously wouldn't get that high with mashing hotter.

Although this would be counterproductive in brewing a lower alcohol brew. Your aim is not to convert sugar to alcohol. US05 should attenuate around the low 80s, at 90% I would suspect you are over pitching.

3% isn't that low, I feel you are over thinking this. Brew one of you normal recipes at a slightly lower OG, mashing a couple of degrees warmer and swap US05 for a more flavoursome yeast that attenuates less.

I do find Americans and their phrase session beers amusing, when the British have been brewing 3-4% beers for centuries.

"A strong classic ale with a golden amber colour. It has a scent of caramel, light fruits and roasted malt hints."

Strong! This is how Timothy Taylor describe Landlord, at a massive 4.3%.
 
Last edited:
I probably have over thought this. I often do when I ponder too long on an idea.
What yeast would you suggest would be a good replacement?
I've looked into kernel's table beer. Sounds good, I found a byo recipe Clone I'll look into more after work and will probably end up adjusting based on that.
After 3&1/2 years of brewing I actually don't have a staple ipa/Amber/pale ale , as I haven't been truly happy with what I've done. The only staples are my breakfast Stout, dry hopped saison and now a cream ale. I do have a pale ale of sorts but it's dry hopped with kaffer lime leaves and liked how it came out, hence why I've been trying to come up with a specific recipe
 
I don't think you can go too far wrong with WLP028. Lallemand London ESB if you prefer dry. US05 isn't a poor choice if managed properly.
 
Last edited:
As Sadfield says, a slightly higher FG should help in the pursuit of some body. There's plenty of hops in your recipe so US-05 is a good choice I think. If you have the ability to split the batch, you could compare with a more ester driven yeast and see what you prefer.
 
My drinking buddy has mastered the art of drinking lots of low abv beer...Boddingtons.
Get a box...you won't drink much.
It's funny....table beer...would that have replaced water back in the day as the water wasn't drinkable?
Why not brew a beer then liquor back in the fv to required strength?
 
Crikey Brann, that's a lot of ingredients! I can't help but look at that with my engineer's eye and think "Keep it simple" :laugh8: But hey, it's your brew to do your way athumb..

I've not even been brewing 6 months yet so treat anything i say with due caution.....

One obvious question I'd ask is what kind of beer do you want to brew? Seems like a session IPA to me - also, it looks like you're late hopping which I've tried, the results were awesome athumb..

One thing i can tell you is i recently brewed a bitter mashed at 70degC to keep the ABV down. It ended up at 3.8% with a FG of 1.019 - the high mash temp means you don't have enough fermentable sugars to get a lower FG (but IIRC, brewers friend still predicted a FG around 1.010).

Does it taste sweet? Nope - for comparison, i tried a commercial bitter afterwards (Bingham's Brickworks bitter) which I'd say was actually sweeter.

Does it have body? Yes - I'm finding flaked barley adds body, mouthfeel and head retention in all my beers.

I don't see any reason why you can't take these ideas and do a session IPA, or whatever else you want.

Good luck, keep us posted athumb..
 
ashock1 flipping eck... My table beer feels hard done by compared to yours and I thought mine was complex.
 
Thanks for all your points/views.
After looking at Kernal's Table beer and the recipe for Siren Yu Lu in the Camra Essential Home Brewing book. I adjusted the malt bill and also reflected the hop schedule to match Siren's Yu Lu. Their single flameout charge has been spilt between my chosen hops to try to achieve a more rounded/melded hop flavour.

HOME BREW RECIPE:
Title: All creatures great or small

Brew Method: All Grain
Style Name: American Pale Ale
Boil Time: 60 min
Batch Size: 21 liters (fermentor volume)
Boil Size: 26 liters
Boil Gravity: 1.025
Efficiency: 70% (brew house)


STATS:
Original Gravity: 1.031
Final Gravity: 1.004
ABV (standard): 3.52%
IBU (tinseth): 25.76
SRM (morey): 5.69
Mash pH: 5.46

FERMENTABLES:
2.4 kg - United Kingdom - Maris Otter Pale (79.7%)
310 g - American - Vienna (10.3%)
190 g - Belgian - Aromatic (6.3%)
113 g - Flaked Oats (3.8%)

HOPS:
5 g - Amarillo, Type: Pellet, AA: 8.6, Use: Boil for 10 min, IBU: 2.35
10 g - Citra, Type: Pellet, AA: 11, Use: Boil for 10 min, IBU: 6.02
10 g - Enigma, Type: Pellet, AA: 14, Use: Boil for 10 min, IBU: 7.67
10 g - Mosaic, Type: Pellet, AA: 12.5, Use: Boil for 10 min, IBU: 6.85
10 g - Amarillo, Type: Pellet, AA: 8.6, Use: Boil for 0 min
20 g - Citra, Type: Pellet, AA: 11, Use: Boil for 0 min
10 g - Enigma, Type: Pellet, AA: 14, Use: Boil for 0 min
10 g - Amarillo, Type: Pellet, AA: 8.6, Use: Dry Hop for 5 days, IBU: 2.87
20 g - Engima, Type: Pellet, AA: 15.4, Use: Dry Hop for 5 days
20 g - Mosaic, Type: Pellet, AA: 12.5, Use: Dry Hop for 5 days
25 g - Citra, Type: Pellet, AA: 11, Use: Dry Hop for 5 days

MASH GUIDELINES:
1) Infusion, Temp: 68 C, Time: 40 min, Amount: 12 L
2) Sparge, Temp: 75 C, Time: 15 min, Amount: 15 L
Starting Mash Thickness: 4.5 L/kg

OTHER INGREDIENTS:
4 g - Calcium Chloride, Time: 60 min, Type: Water Agt, Use: Mash
3 g - Epsom Salt, Time: 60 min, Type: Water Agt, Use: Mash
5 g - Gypsum, Time: 60 min, Type: Water Agt, Use: Mash

YEAST:
Wyeast - London Ale III 1318
Starter: No
Form: Liquid
Attenuation (custom): 87%
Flocculation: High
Optimum Temp: 17.78 - 23.33 C
Pitch Rate: 0.35 (M cells / ml / deg P)
 
Back
Top