GrainFather v other systems.

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
So the pump draw off is above the dead space and the tap is the same on the Robo? No tap on the GF?? How is it drained?
My gravity draw off of the wort is started in a controlled way to just start the wort moving without mass disturbance of the settled break material. How is this done with a pump?
 
The GF uses a pump to drain as you pump through a counterflow chiller. I give it a good whirlpool after the boil and leave it to settle for 10 - 15 mins, the pump does draw the trub to the filter but then it acts as it's own filter and I only use pellet hops. Downside to a CFC is that the cold break gets into the FV, but that doesn't really matter unless you want to see lovely clear wort, I think the cold break is amusing as it looks like a "thing from the deep" lurking below your wort as it settles.
 
So the pump draw off is above the dead space and the tap is the same on the Robo? No tap on the GF?? How is it drained?
My gravity draw off of the wort is started in a controlled way to just start the wort moving without mass disturbance of the settled break material. How is this done with a pump?
The wort is pumped through the malt pipe to the chiller. You could use the ball valve on the malt pipe to slow the flow of wort if you wanted.
I only ever use the ball valve when mashing if to much wort is going down the overflow pipe. Only ever have it fully open when pumping to the fermeter.
Same as @Zephyr259, I'll whirlpool (by hand) if I've got a lot of hops in the brew.
My brews clear quickly, usually 3-4 days into warm conditioning. The only problem I get is chill haze.
It might be worth having a look at the instructions https://www.themaltmiller.co.uk/wp-content/uploads/2017/04/Grainfather-instructions.pdf if you're thinking of gettin one, or have a look at @strange-steve excellent guide.
 
I started my AG adventures with a Grainfather. I had previously done loads of kits and a few extract brews.

I have not regretted the decision once. I bought the GF, the conical fermenter and the sparge heater.

You definitely don't need the sparge heater - you could just use a big pot on the stove but it is easy.

You don't need the fermenter - you could use plastic buckets. Indeed if you want to use a brew fridge to control fermentation temp then it might be easier to use a bucket! I do like my fermenter though it works well and is easy to use and clean. I live in the UK so don't have to deal with extremes of temperature too much. I've found the inbuilt heater and the chiller pump works well enough for my needs.

The GF itself is a joy to use. I have not had any issues with stuck mashes, slow sparges, scorched wort etc etc. The only issue I had was when I knocked a pipe off into the GF whilst adding the grain. Bit of a pain but managed to retrieve it and carry on without too much problem.

You also get access to loads of support on the facebook group and on fora like this plus the app gives you access to loads of recipes to try.

Finally, the quality of the beer is so very much better than kits or extract. It tastes like real pub bought beer.

Go for it you won't look back.
 
the robobrew has a tap about an inch above the base and an inch below the false bottom (which does filter quite a lot of break material).

it also has a recirculation port in the bottom but easier to use the tap.

I also use a voile bag to filter any other **** into the FV as I find it impossible to get clear wort whether with a robobrew or regular copper (no matter how hard I try to whirlpool etc). Usually not much comes out of the robobrew though
 
I have made various videos on this topic. I would say at this present time this one is the most relevant:-
Hopefully you will see that this is a totally unbiased video, I actually own both systems personally. There is no clear winner between Robobrew or Grainfather, it is just about your budget and what features are important to you.
 
I have made various videos on this topic. I would say at this present time this one is the most relevant:-
Hopefully you will see that this is a totally unbiased video, I actually own both systems personally. There is no clear winner between Robobrew or Grainfather, it is just about your budget and what features are important to you.


OMG! You're a member on here! I'm a subscriber! athumb..
 
Thanks Soyyojuli! I know that it’s very similar to a few that are on the market but when I saw it and the price I knew it was a good one to begin on. It’s a really cool thing!
Its an awesome machine. I also really liked the water level in the outside. It's also a little lower than the rest of the machines. Making it good for the countertop. The temp control is also really good. Of by 0.2-0.3 degrees at most. Only reason I haven't bought it yet is that it's a little steeper here in Norway. Going for about 5300kr, 520 pounds. Please keep doing videos brewing on this machine. There isn't a lot of them. Cheers
 
Its an awesome machine. I also really liked the water level in the outside. It's also a little lower than the rest of the machines. Making it good for the countertop. The temp control is also really good. Of by 0.2-0.3 degrees at most. Only reason I haven't bought it yet is that it's a little steeper here in Norway. Going for about 5300kr, 520 pounds. Please keep doing videos brewing on this machine. There isn't a lot of them. Cheers


THATS a bummer about cost in Norway! Maybe you could see if you can do a deal with the Brewolution guys to get some other stuff in the price. A couple of beer kits maybe? I’ll keep the vids coming...I’m gonna do an IPA in next few days so can’t wait! Thanks for the kind words, it means a lot!
 
THATS a bummer about cost in Norway! Maybe you could see if you can do a deal with the Brewolution guys to get some other stuff in the price. A couple of beer kits maybe? I’ll keep the vids coming...I’m gonna do an IPA in next few days so can’t wait! Thanks for the kind words, it means a lot!
They only sell this machine through secondary vendors here in Norway and they take their cut so it's more expensive. Maybe directly from Denmark would be better? Anyway great video man. Well spoken, good quality and very informative. Can't wait for the next one. Maybe make one of the brewing day and one pointing out different problems if any you encounter.
In my opinion this machine looks better than the GF. Shinier, if you know what I mean. The pump is also very strong and will empty out the wort in under 5 min to the FV. What kind of IPA are you going to make? I just made a hüll melon pale ale with a touch of summit for bitterness. Smelled awesome. I used my plastic brewery.(basically, I made my own brewing machine using buckets and heating element etc. Works great, even though its not a looker).
 
THATS a bummer about cost in Norway! Maybe you could see if you can do a deal with the Brewolution guys to get some other stuff in the price. A couple of beer kits maybe? I’ll keep the vids coming...I’m gonna do an IPA in next few days so can’t wait! Thanks for the kind words, it means a lot!
Just saw your video of the Brewster in action. Plum Porter! Sounds and looks amazing.
 

Latest posts

Back
Top