The Mad Russian - Imperial Stout

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Sounds like the kveik yeast has fought the good fight but is now done. I'd be inclined to use champagne yeast to bottle condition this megaloden esque stout. I think most champagne yeast are rated up to 18‰ abv.

The safale F2 data sheet says over 10% but not sure how high it would actually tolerate.
 
I was really hoping to not have to use champagne yeast, but there was actually a big krausen on the kviek starter this morning so there's life there at least (I think it's a bit cold for it in my kitchen, hence the lag). I think I'll put botlling off for a day or two, let the starter finish up then crash it and add a little of the yeast to the bottling bucket and hope for the best. If crossed fingers and mindless optimism aren't enough then I suppose reseeding the bottles is a final (though really not ideal) option later down the line.
 
I was really hoping to not have to use champagne yeast, but there was actually a big krausen on the kviek starter this morning so there's life there at least (I think it's a bit cold for it in my kitchen, hence the lag). I think I'll put botlling off for a day or two, let the starter finish up then crash it and add a little of the yeast to the bottling bucket and hope for the best. If crossed fingers and mindless optimism aren't enough then I suppose reseeding the bottles is a final (though really not ideal) option later down the line.

I understand your reluctance to use champagne yeast. I just think that for such a one-off beer such as this, if it were me, I wouldn't want to take any chances.

However, if the kveik starter has taken off then I imagine it would be good to bottle prime the beer.

What about krausening with a kveik starter instead of crashing it first?
 
What about krausening with a kveik starter instead of crashing it first
Actually I have been thinking about this since foxbat mentioned it previously, but again I was a bit reluctant cos I've never done it before. But after a read of Braukaiser's guide I thought it might be the way to go.

I used the krausen calculator on brewer's friend and added half a litre of the starter plus a little table sugar which should give around 2 vol/CO2. Will it work? Effed if I know, but it's done now anyway. 44 bottles, mostly 330ml with a few 500ml incase it's worth entering a comp or two.
pQqiuZS.jpg
 
The plastic test bottle from yesterday has firmed up already, this brew continues to confound me.

Btw, as soon as I can confirm proper carbonation I'll get a couple of these posted out to @Ajhutch for winning the "guess the ABV" competition. There's also a bottle each for @Zephyr259 and @BeerCat as thanks for supplying the seemingly bullet proof yeast athumb..
 
Thrilled to have won! It’s been a really interesting read and I’m massively looking forward to tasting the finished product.
 
Well it's been a week since bottling so thought I'd open a bottle to check carbonation. I'd describe it as nonexistent. Bugger. A very small hiss on opening, poured with no head and not a hint of carbonation on the tongue.

Edit to add: the flavours are great though, I can't believe how smooth the alcohol is even this young.
 
Well it's been a week since bottling so thought I'd open a bottle to check carbonation. I'd describe it as nonexistent. Bugger. A very small hiss on opening, poured with no head and not a hint of carbonation on the tongue.

Edit to add: the flavours are great though, I can't believe how smooth the alcohol is even this young.
I've had a Big beer exactly like this, without carb or head but I've enjoyed it all the same and would even consider brewing again WITHOUT any intention of carbing or heading. :laugh8:
 
I'm in the same boat. My measly 12% Mole RIS is pancake-like. Hopefully it'll improve with time. After all, there some Cantillon vintages that take a few years to carbonate.
 
I had one that took over a year to carbonate. Until then it had the taste and consistency of creosote. By the time it was ready there was hardly any left!
I must look up that recipe and avoid it in the future,
 
It's possible that it will get there eventually but my optimism is beginning to fade, I've a feeling I pushed the yeast a tad too far. Next time I'll try a sensible OG, something like 1.135 :D
 
It's possible that it will get there eventually but my optimism is beginning to fade, I've a feeling I pushed the yeast a tad too far. Next time I'll try a sensible OG, something like 1.135 :D
It's only a week. Some beers take much longer than that. I don't even taste my bottled beers before 4 weeks (unless it's a weissen or wit) and most need 6 weeks.
Don't give up hope just yet.
Of course, if you're trying to talk yourself into getting another death-brew on the go, then yeah, it's ruined. Start again. :laugh8:
 
It's only a week. Some beers take much longer than that. I don't even taste my bottled beers before 4 weeks (unless it's a weissen or wit) and most need 6 weeks.
Don't give up hope just yet.
Of course, if you're trying to talk yourself into getting another death-brew on the go, then yeah, it's ruined. Start again. :laugh8:
I know I'm being premature, but this yeast has been so quick the whole way through I was expecting the carbonation to be the same. I'll leave it another few weeks before I give up on it :D
 

Latest posts

Back
Top