Connecting Wort Chiller to modern style tap

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 16, 2011
Messages
759
Reaction score
297
Location
High Wycombe, Bucks, UK
Since I have done my last BIAB (nearly two years ago!) our kitchen has been re-done and my wife insisted on one of those new style taps, flexible neck, sprayer, etc (see photo). Been trying to work out how to attach the inlet hose of the chiller - with the old style tap it was easy to use a hose coupler. Have been trawling the internet to find a ready made connector but to no avail. Is there an easy way to do this - DIY I assume is called for? Anyone? It's an Ikea kitchen tap.

IMG_2522.JPG
 
https://www.toolstation.com/washing-machine-tap-self-cutting/p48347

i would forget the topside of the tap and head south, try a self cutting clamp on tap, under the work top, memshaab keeps her new kitchen brew free , you have a perfect threaded fitting with a hoselock fitting hidden under the work top. do it your self all in a tenna
Was thinking about that, definitely much neater than some suggestions, for example using gorilla tape to fix the hose at the bottom ..... though I have also been pondering getting a hose fitting the tap diameter and using a large jubilee clip to fit temporarily for the brew.
 
See if you can tee into the washing machine/ dishwasher supply instead, and have the threaded type connector available under the sink instead. You can also use a flexi tail to an area you can get to closer to the door and fix that down well with saddle clamps so it won't stress the original pipework if someone trips over the hose.

I've done this with a Y fitting to install a dishwasher inline, and a water filter.

If you have additional isolator ball valves under there it could be easier than a tap fitting in your case.
T valves also available to replace a single of the same dimensions, so you can branch off.
 
I was in the same boat, got 1/2” bsp to 3/4”bsp reducer coming through the post, a little cheaper than the official hozelock one off of Amazon
 
Hi. I tried to buy a John Guest attachment that I could attach to the Hozelock adapter that would then accept 3/8 gas beer line. I thought this would be great for flushing with hot water but the fitting they sent is the wrong size. It's not even 3/16 unfortunately. I saw them on Amazon but a couple of people said they'd received the wrong fitting so I ordered elsewhere. Starting to wonder if this fitting actually exists now. Returning mine at the moment.

https://www.ebay.co.uk/itm/John-Gue...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

https://www.amazon.co.uk/John-Guest...1_1?keywords=CI321216FS&qid=1579007124&sr=8-1
 
I have ones of these. I just unscrew the filter from my kitchen mixer tap and screw this on. It's particularly useful for filling FV's and Corny's with hot water via a hose when cleaning.

https://www.amazon.co.uk/gp/aw/d/B0034G5NR2?psc=1&ref=ppx_pop_mob_b_asin_title

same. From the tap I run it into a 3/4” bsp washing machine hose as I know that’s pressure rated. At the wort chiller I did get specialised 1/2” bsp to metric 10mm connector s And use with the 1/2” bsp to 3/4” bsp reducer. Recently I obtained a 1x 1/2” bsp male to 2x 10mm compression copper T fitting. That was a pain to screw up but does mean I could split incoming and run two parallel chiller coils.
 
Hi. I tried to buy a John Guest attachment that I could attach to the Hozelock adapter that would then accept 3/8 gas beer line. I thought this would be great for flushing with hot water but the fitting they sent is the wrong size. It's not even 3/16 unfortunately. I saw them on Amazon but a couple of people said they'd received the wrong fitting so I ordered elsewhere. Starting to wonder if this fitting actually exists now. Returning mine at the moment.

https://www.ebay.co.uk/itm/John-Guest-CI321216FS-3-4-BSP-x-3-8-PF-Push-Fit-Tap-Valve-Connector/230655718338?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

https://www.amazon.co.uk/John-Guest...1_1?keywords=CI321216FS&qid=1579007124&sr=8-1

I forgot where it is but there is a massive John Guest catalogue online where you can look through the combinations and ratings or alternatively plumbers merchants might have it. I think I have a John guest female 3/4” bsp to 3/8” push it. I was planning to try it with 10mm copper but decided against it.
 
I have ones of these. I just unscrew the filter from my kitchen mixer tap and screw this on. It's particularly useful for filling FV's and Corny's with hot water via a hose when cleaning.

https://www.amazon.co.uk/gp/aw/d/B0034G5NR2?psc=1&ref=ppx_pop_mob_b_asin_title

Dammmmmn. How much time wasted over the years trying to persuade a "modified" hozelock tap adapter to squidge onto the end of my tap without squirting everywhere? How much time clearing up the mess when it clearly doesn't work?

I didn't even know these were a thing. Bloody obvious really... but hey ho. Every day's a school day.
 
Done a dummy run with the wort chiller connection - opted for the tap connector rather than a permanent solution which is a good idea if you do loads of brews. Only do max three BIAB brews a year so this is the most economical solution, also do kit brews which are much simpler of course.
This is the 1/2 inch connector fitted to the inlet hose which goes to the Ikea tap:
Capture1.JPG
The complete connection (Spray/Filter unit removed):
Capture.JPG
It seems most tap connectors are 3/4 inch, 1/2 inch seems to be rare,maybe.
 
Back
Top