RoomWithABrew's latest activity

Help Support The HomeBrew Forum:

  • RoomWithABrew
    RoomWithABrew replied to the thread Ferminator/Peltier Chamber.
    I secure the temp probe to the side of my vessels with some blu tack and then some highdensity foam insulation ( from sleeping mat ) on...
  • RoomWithABrew
    RoomWithABrew replied to the thread So frustrating.....
    @Stevieboy Several of us agree with you , as per post of @Buffers brewery and @Nottsbeer and @RoomWithABrew The best the PTFE tape...
  • RoomWithABrew
    RoomWithABrew replied to the thread So frustrating.....
    @DonnyOwl Progress which is good news. Yes I think it's a good plan of yours to fill the KK and then put some gas in. As we have...
    • IMG_20210915_091411.jpg
    • IMG_20210915_091130.jpg
  • RoomWithABrew
    RoomWithABrew replied to the thread Ispindel leaking!!.
    Not a design I've seen before, I assume you mean the sled can rotate and is slightly loose inside the tube, putting some tape on the...
  • RoomWithABrew
    RoomWithABrew replied to the thread Ispindel leaking!!.
    Didn't think so, and couldn't see how the weights would have stayed on.
  • RoomWithABrew
    RoomWithABrew replied to the thread Ispindel leaking!!.
    I've reread your post, you aren't sticking the weights on the outside of the tube are you? You shouldn't get any leaks really with it...
  • RoomWithABrew
    RoomWithABrew replied to the thread So frustrating.....
    Agree, lid the likely culprit. Check the top of barrel that the oring sits on is nice and smooth, no nicks, cracks in the neck of the...
  • RoomWithABrew
    RoomWithABrew replied to the thread Lalbrew London..again.
    You can't get clearer than that. I just finished my barrel the other day of 5 points and this was the last pint. Will be using the hop...
    • IMG_20210904_185743.jpg
  • RoomWithABrew
    RoomWithABrew replied to the thread Ispindel leaking!!.
    Send us a picture of your spindel, sled / pcb, not just a case of what weight but where is the weight.
  • RoomWithABrew
    Use this calculator to work out how many vols you have before you start https://drhansbrewery.com/beercarbonationcalculator/ then use...
  • RoomWithABrew
    RoomWithABrew replied to the thread Digimash v brewzilla.
    You can always put a pump on later, the gen 1 ad 2 robobrew had no pump and I think the anvil system has an external pump. Don't wait...
  • RoomWithABrew
    RoomWithABrew replied to the thread Ispindel leaking!!.
    Okay don't panic been there done that but no T shirt. Shouldn't need to buy another tube. Is it out of shape from really hot water or...
    • IMG_20210508_182347.jpg
    • IMG_20210508_182356.jpg
    • IMG_20210505_162246.jpg
  • RoomWithABrew
    RoomWithABrew replied to the thread So frustrating.....
    @Stevieboy agree but do it via a post so you can sterilise it nicely. I had an infection with a gauge fitted directly onto the top of...
  • RoomWithABrew
    RoomWithABrew replied to the thread So frustrating.....
    @DonnyOwl Very frustrating, did the beer go sour and then you dumped it? That really does suggest a leak and oxygen got in. Do read...
  • RoomWithABrew
    RoomWithABrew replied to the thread Pressure Fermenting Time.
    @m_kc The float is the issue as you say too big for the opening on those mini kegs. I've been on the lookout for a " plastic " cork as...
Top