Fermenting fridge shelve

Shop deals on ebay
shop deals on amazon
Advertise with us
The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Sbond10

Sbond10

Regular.
Joined
Feb 18, 2016
Messages
252
Reaction score
42
Location
NULL
Just ordered myself an inkbird 308 and a 20w heat bulb now for the final touch I need to make some sort of stand to support the bucket on.
Anyone got any suggestions or diagrams I can follow. The plan is to mount the bulb to the floor on one side so the stand needs to be an inch or so sort on one side. Or can I put the bulb on the roof ?

Thanks for any help

Cheers sean

The bulb is a black none light admitting bulb
 
I made a square frame out of timber, and I just rest a shelf on top of it. Inside the square frame I screwed a board and mounted my heater light socket to that, so the light sits within the frame, under the shelf (which has holes drilled in it to let the heat circulate).

20160309_081325.jpg
 
Looks interesting I was worried about a heat bulb straight under the fv./bottles guess I'm over thinking again this.
My other idea was to use a child's reaching step
 
I use a pc fan attached at 90° to the heat source to move the heat around and avoid a hot spot. Not sure if it helps but in my mind it does!
 
Didn't want to wire up anymore than I had too but it's something to bare in mind
 

Similar threads

Ben034
Universal c02 regulator
Replies
8
Views
828
Ben034
Ben034
The Baron
Ispindel Charging and temp variance
Replies
4
Views
2K
hoppyscotty
hoppyscotty
F
DIY terracotta pot electric pizza oven build - Advice needed, please!
Replies
5
Views
1K
Empty bottle
Empty bottle
phillc
WiFi Temperature Probe and Controller with MQTT (maybe Inkbird)
Replies
11
Views
2K
phillc
phillc
U
Smelly Fridge
Replies
11
Views
449
RummerMan
R

Latest posts

Back
Top