• If you have bought, sold or gained information from our Classifieds, please donate to The Homebrew Forum and give back.

    You can become a Supporting Member or just click here to donate.

My old BIAB set up

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

uDicko

Landlord.
Joined
Dec 31, 2018
Messages
714
Reaction score
292
Location
Sheffield
Hola.

Doing a clear out and I also have a box big enough to get it all sent at once.

My preference would be to sell the lot in one go so save on admin headache.

Probably a good upgrade for those who are looking to advance from kits to a basic all grain set up.

I have the following :
  • 1 x 33 litre stainless boiler (Inc kettle element and proper heat resistant cable)
    • 1 x mounted whirlpool nipple
    • 1 x thermowell (good for controlling heat up with inkbird)
    • 2 ball valves bottom and middle
  • 1 x BIAB bought from MM a while back
  • 1 x Dry hop tube
  • 1 x Large hop spider
  • 1 x Solar pump
    • Ball valve on the pump
    • Required silicone tubes
    • Jubliee clips to keep in place
    • Required power supply

As I said want to send it all in one and its pretty much the whole set up needed to start all grain.

Looking for 130 delivered.

Cheers
 
Pics would have helped... Doh
 

Attachments

  • IMG_20190606_075839.jpg
    IMG_20190606_075839.jpg
    36.6 KB · Views: 276
  • IMG_20190606_075842.jpg
    IMG_20190606_075842.jpg
    34.3 KB · Views: 295
  • IMG_20190606_075849.jpg
    IMG_20190606_075849.jpg
    32 KB · Views: 292
  • IMG_20190606_075919.jpg
    IMG_20190606_075919.jpg
    21.4 KB · Views: 280
  • IMG_20190606_075844.jpg
    IMG_20190606_075844.jpg
    40.8 KB · Views: 286
  • IMG_20190606_080059.jpg
    IMG_20190606_080059.jpg
    33.1 KB · Views: 270
  • IMG_20190606_080237.jpg
    IMG_20190606_080237.jpg
    17.9 KB · Views: 303
  • IMG_20190606_075937.jpg
    IMG_20190606_075937.jpg
    26.4 KB · Views: 269
  • IMG_20190606_075951.jpg
    IMG_20190606_075951.jpg
    24.6 KB · Views: 257
Just so people know, I'm going to leave it on here for a week then stick it on ebay.
 
Being relatively new to this but on a budget (bloody twins going to secondary school and growing up) all I want to know is what else I would need to get for myself equipment wise. Would this be useful to someone making a jump from extract kits to all grain?
 
To be honest, the stuff listed here will be an accompaniment to your existing kit equipment.

I would imagine you will already have everything else.

Been racking my brain trying to think what extras you would need and I can't :laugh8:
 
Now sold.

Not sure on etiquette here. Can I close/lock the thread myself?

Either way it's gone.

Cheers
 
Status
Not open for further replies.
Back
Top