private4587
Member
should say image
How to use iSpindel without external service
- Thread starter GeorgieV
- Start date
Help Support The Homebrew Forum:
Not sure I put the correct link in, this one is the correct one for the standalone image: HOWTO: iSpindel RasPySpindel Server Image (Vorinstalliert) - hobbybrauer.de.
This is not the latest version, but does work out of the box and requires little to no configuration, sorry i didn't read the link properly when I posted earlier, my bad.
This is not the latest version, but does work out of the box and requires little to no configuration, sorry i didn't read the link properly when I posted earlier, my bad.
When you download the zip file, there's an image to be flashed onto the SD card and a readme file in english which has all the info needed to get you going.
- Joined
- Dec 20, 2020
- Messages
- 107
- Reaction score
- 25
Thanks for the update
JT_Brews
Active Member
- Joined
- Jan 16, 2020
- Messages
- 64
- Reaction score
- 16
I don't use a hardware interface, I'm a coder not an engineer damnit. Instead I use a device (Broadlink RM4 I think) that can be told over wifi to send RF signals that switch RF controlled sockets on/off.
But that's just because I had the kit laying around from a few years ago before smart sockets were more developed, if I were doing it now I would do it directly with wifi controlled smart sockets. That seems a lot easier to me than messing with hardware.
Sorry, my bad used the wrong link, I've posted the right one now (I hope).
Fermentrack - BrewPi-Compatible Fermentation Tracking Software offers logging and temperature control. However, the temperature used for the control does not come from iSpindel, but from temperature probes connected to another ESP8266 which controls relays connected to heating and cooling circuits. So you will need to build something but it is well documented.
lupinehorror
Landlord.
i use fermentrack but will stick the RaspySpindel image in storage and maybe try it with a future brew. thanks for the link.
- Joined
- Dec 20, 2020
- Messages
- 107
- Reaction score
- 25
Can someone please post their wpa_supplicant.conf file
I can't get mine to display english
EDIT
Never mind I was looking in wrong place
I can't get mine to display english
EDIT
Never mind I was looking in wrong place
Last edited:
- Joined
- Dec 20, 2020
- Messages
- 107
- Reaction score
- 25
Can anyone remember what they did to get the web page to display in English? I've changed all the timezone and local settings, but the web page is still in German
Found it.
Go to third button the right from home page, select the last option from the pull down menu and there you will find the language option
Found it.
Go to third button the right from home page, select the last option from the pull down menu and there you will find the language option
Last edited:
- Joined
- Dec 20, 2020
- Messages
- 107
- Reaction score
- 25
Thanks Chris, I'm going to give a go at te weekend
- Joined
- Aug 9, 2019
- Messages
- 370
- Reaction score
- 156
Only just seen this thread! I use my ispindel with mqtt posting to home assistant - all inside my home network and nothing public. Works great and all fairly straight forward.
Similar threads
