Search results

Help Support The HomeBrew Forum:

  1. private4587

    Beer Engine Sanitation at Home

    Please see Buffers Brewery it was he who supplied the parts for this conversion, he was great in offering advice and parts list
  2. private4587

    The Chaos that is a Buffers Brewery brew day

    Fusion 360 is a great package and is free for education purposes ( just sign up as student) plenty of Youtube videos online for learning. It is capable of exporting as a .stl files straight to your slicing software of which there are good free ones Cura one of them
  3. private4587

    Beer Engine Sanitation at Home

    I also use King Keg barrels but they have been adapted for use with my beer engine
  4. private4587

    Beer Engine Sanitation at Home

    I use a 3d printed cap on the nozzle when in-between use, it has O ring seal in place and a good squirt of starsan. then dispose of first pull when using
  5. private4587

    The Love Brewing Trick or Treat Giveaway!

    I’m in Red Rebellion please
  6. private4587

    Ispindel & Full Calibration Offer - AssetSolution

    Great company, I bought one and it cam fully compatible with my system. I used in my first brew and it was faultless. When I went to recharge it the charging port came away from the board. Upon reporting this to company was asked to return and it was repaired and returned within a week
  7. private4587

    Beer Engine Sanitation at Home

    I pull approx 1/2 pint to 3/4 each time I use my engine. It sounds a lot but for me it’s worth it for a great pulled real ale pint. Much better than the so called beer from your average pub
  8. private4587

    Blockages

    Thanks engineer that was my thoughts but was hoping someone would give me a valid reason why it would be okay to use. Will wait until SS one arrives
  9. private4587

    Blockages

    Hi I thought I had sourced a right angled fitting 1/2”x8mm but when it turned up it was in brass. My fault for not reading the script properly. I have since ordered again making sure it was in SS. My question is there any problem using the brass one during the boil
  10. private4587

    Carbonating temp/pressure

    i understand the carbonation for use with my hand pull, its the carbonation temp/pressure for bottling that as me baffled. I will be bottling under pressure using my iTap system. So again its down to which temp do i use i.e. fermenting temp or cold crash temp
  11. private4587

    Greg Hughes Milkshake IPA

    any chance of posting recipe as i have an earlier addition and its not in there
  12. private4587

    Carbonating temp/pressure

    hi everyone hope someone can help here, i have the chart for carbonating my brews but am puzzled by what temp i should use. Should i use the fermenting temp. or should i use the cold crash temp. I will be bottling and using KK with a my beer engine. With the KK i am not to bothered as the...
  13. private4587

    Greg Hughes recipes

    It would appear that I have an older edition, any chance you could scan the page and post on here
  14. private4587

    Greg Hughes recipes

    Sorry to be a pain but I have brewed a few of Greg’s recipes and all very good. Very interested in trying out his NEIPA which I believe is in this book but for the life of me cannot find could anyone point me to the page number, honest I’m not blind
  15. private4587

    Blockages

    Thanks for that Lisa and again to be a pain, when you have it installed could you take a pic to show how you have coiled it into the brewzilla
  16. private4587

    Blockages

    Lisa sorry to be a pain but any chance of the links for the parts you used as I understand it was a smaller hose barb than originally mentioned
  17. private4587

    Blockages

    Just thinking Lisa you make some jack stands off the feet by drilling them and adding say 6mm bolts and nuts and creating a stand off just enough to cover the T piece
  18. private4587

    Blockages

    Thanks Lisa
  19. private4587

    Blockages

    Hi Lisa any update on this, i 'm waiting on your trials before i proceed in buying the parts
  20. private4587

    Blockages

    will be very interested in your report on this upgrade Lisa has i am wanting to do away with spider and socks but scared of getting pump blockage
Top