leak

Hi All, Just got the S40 unpackaged and cleaned out. Was just wiping the inside and was thinking about decontaminating the pump and inlet /outlet. Added 20 litres of hot water and set it to heat up. After a while I switched on the pump and water started to escape from the connection above the...

Hi All, I have a corny keg which is leaking from the beer out post. I have replaced the o-rings, as well as having removed the posts and cleaned them. I have also tried PTFE tape on the thread of the post, but still getting a very visible leak when i spray with sanitiser. Any ideas/tips...

Introduction I use quite a few bottom-tap King Keg pressure barrels and I have very few problems with them. From discussions on the forum though it’s clear that many people do struggle with pressure barrels so I thought I might put together a few thoughts you might find useful. Although I...

Hi. I've just bought a new 25L bucket, tap and bottling wand (from Wilko), fitted the tap/wand, and used it for the first time. Previously I always just bottled direct from the FV, (until I read about a bottling bucket here! ) - initially just with a long siphon tube (messy) then with a...