Cleaning corny PBW?

[suffolkbeer]

Just emptied my first corny....

Is it ok to clean it out with PBW and then rinse as normal (I’m assuming it is)

Will it be ok to flush the line and tap out with PBW any then flush out thoroughly with water??

 

[foxbat]

That's how I do it. Rinse gunk out. Add PBW. Shake a lot. Push through the lines with PBW. Repeat with water to rinse.

 

[xozzx]

That's how I do it. Rinse gunk out. Add PBW. Shake a lot. Push through the lines with PBW. Repeat with water to rinse.

Same but another final step with starsan.

 

[SkyBlue]

I do exactly the same only use 3-4 litres boiling water for one final rinse and flush out of the beer line. Just make sure the lid is on tight. Shake well and the pressure is enough to force out the boiling water. Take lots of care!

 

[suffolkbeer]

Thanks guys, all done!

 

[foxbat]

Same but another final step with starsan.

I do the starsan rinse but I do it immediately before kegging a new batch not after cleaning out an empty keg.

 

[Trom-man76]

Is that the same with 9 gallon kegs or would you do a peracetic acid wash at the end