Fridge size help

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jon1964

Regular.
Joined
Oct 8, 2020
Messages
256
Reaction score
268
Location
Derbyshire
Looking at this fridge from curry's
Anyone used this model for Corney kegs. Looking to fit two 19ltr kegs in if possible.
The exterior dimensions are 83.9cm ht x 49.4cm width and depth.
 
Looking at this fridge from curry's
Anyone used this model for Corney kegs. Looking to fit two 19ltr kegs in if possible.
The exterior dimensions are 83.9cm ht x 49.4cm width and depth.
I’ve one of those, used as a brew fridge with and inkbird.
It will only fit one 19L corny. If your happy with a shorter 12L for the second keg it will sit up on the higher shelf inside.
 
Here’s 1 corny and 1 mini keg. That’s about it for capacity.
8899D054-D381-4A43-A983-B3471962BC64.jpeg
 
I use the Essentials Model CUL55W19 and can fit two 19L cornies and one 9L corny at the back.
For the taller 19L keg you need to remove the light fitting on the right hand side of the fridge.

IMG_20210227_085947.jpg
IMG_20210227_090326.jpg
IMG_20210227_090405.jpg
IMG_20210227_090551.jpg


Hope that helps.
Steve B.
 
Just to add in case it helps anyone. I can confirm the Essentials Model CUL55W20 also fits 2x new 19l cornies. You do need to remove the front screw from the thermostat / light fitting and swing it up to allow the keg to fit same as above. Getting the drain plug out to fit the gas line in isn't the easiest and needed drilling out in the end as its foamed in. But other than that that it all works. There is additional room behind the 2x19l kegs for other stuff.
 
The best you can get in regards to under counter fridges are Bosch Logixx.
You can comfortably fit 2 x shorter fatter style corny kegs in with room to spare.
One ebay now for £18
 
Back
Top