HELP NEEDED... BURNER GAS PIPE QUESTION

[Motorhomebrew]

So I've bought a Cr@py Burner off Fleebay it came with a 6.3mm gas pipe and connections I've not seen before. See pics
One side connects to the burner but the other side connects to the regulator.. my issue is I don't believe our LPG or butane bottles in this country will work with the regulator supplied.

Am I correct?

If so I'm abit stumped

 

[Dutto]

Photo 1 appears to be the connection from the gascregulator that fits on to …

… photo 2 which seems to be a direct brass-to-brass Propane connector, the far end of which connects the length of pipe to the burner.

The gas regulator typically controls the pipe to the burner pressure at +/-37mbar.

Search for “Clip-on Gas Regulator” and you will probably see one that you recognise.

Calor Gas sell both Propane & Butane compatible cylinders.

Without seeing and handling things I can’t offer a positive identification, but I hope this helps.
:hat: