Hi all , starting a new adventure in making some beer

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fireworkmaster

Well-Known Member
Supporting Member
Joined
May 24, 2022
Messages
125
Reaction score
111
So I purchased a full starter setup with pressure barrel ( have read the sticky regarding these and tested ) found a leak on the pin valve , waiting on new gas canisters to test if the fettling fixed it or I need to get a replacement.
Going with a st peters ruby red kit.

Will be looking at some wine and potentially cider making as time goes along , garden produces lots of fruit ;).
Been lurking for a while so figured it was polite to say hi before picking peeps brains.
Have fond memories of making wine/beer with my dad as a nipper.
Elderberry was one I liked , hated picking the gorse flowers though dam spikey plant that.
 
Welcome to the forum and happy brewing. I have a nice collection of beers in my garage. My family, partners etc are all coming to our home for a BBQ on Saturday. My stash is going to be destroyed 😂. Just as well I have more on the go! Enjoy, it’s a great hobby and you’ll be very popular.
 
Welcome! This is what the Ruby Red looks like and tastes wonderful!

7BB4C8CA-D885-46C2-9CB2-628977C9E8E9.jpeg


I recommend the 2+2+2 as a minimum! (2 weeks fermenting + 2 weeks carbonating + 2 weeks conditioning)

It may seem a long time but it’s worth every second!
:hat:
 
Welcome to the forum and happy brewing. I have a nice collection of beers in my garage. My family, partners etc are all coming to our home for a BBQ on Saturday. My stash is going to be destroyed 😂. Just as well I have more on the go! Enjoy, it’s a great hobby and you’ll be very popular.
Limited on storage space unless I utilise the shed , given the temperature swings though that's probably not good ;( hoping to get another pressure barrel next month and get a second kit going , this one has piqued my interest
https://www.the-home-brew-shop.co.uk/mangrove-jacks-brut-ipa-beer-kit.html
 
Welcome! This is what the Ruby Red looks like and tastes wonderful!

View attachment 69433

I recommend the 2+2+2 as a minimum! (2 weeks fermenting + 2 weeks carbonating + 2 weeks conditioning)

It may seem a long time but it’s worth every second!
:hat:
Cheers will take the advice , in no hurry , good things come with patience, luck and learning
 
Welcome Fireworkmaster ,
Interesting username ,are you involved with displays etc ?
Yes I used to be , had a display company and was involved in many bonfire society displays in Sussex , mostly rye & winchelsea .
Unfortunately disability
( non explosive related lol ) has put a stop to me blowing stuff up and creating / organising events.
These days it's watching local show with the kids and enjoying a pint instead of freezing my nutz off in winter with a perpetual smell of sulphur lingering lol
 
Funny enough i also had a display company up to about three years ago ,but for various reasons sold up ,now i content my self with just lighting something every now and again ,and a few at BFN.
 
Funny enough i also had a display company up to about three years ago ,but for various reasons sold up ,now i content my self with just lighting something every now and again ,and a few at BFN.
Nice , I do miss it but I know that I would be a danger to myself out their these days.
Used to love hand fireing smaller shows , had a Nighthawk system for the bigger shows, fired a few 16" shells at Rye , dang do they make a thump when they launch. Tube was 24" outside diameter 8ft tall burried 3 ft deep, after firing less than a ft was sticking out the ground , thankfully we wrapped it in a rope net, had to use the backhoe to get it out lmao.
 
Nice , I do miss it but I know that I would be a danger to myself out their these days.
Used to love hand fireing smaller shows , had a Nighthawk system for the bigger shows, fired a few 16" shells at Rye , dang do they make a thump when they launch. Tube was 24" outside diameter 8ft tall burried 3 ft deep, after firing less than a ft was sticking out the ground , thankfully we wrapped it in a rope net, had to use the backhoe to get it out lmao.
Seems to me there's an urgent job in certain London cellars just waiting for a couple of likely lads like yourselves. Hahahahaha.
 
Limited on storage space unless I utilise the shed , given the temperature swings though that's probably not good ;( hoping to get another pressure barrel next month and get a second kit going , this one has piqued my interest
https://www.the-home-brew-shop.co.uk/mangrove-jacks-brut-ipa-beer-kit.html
I’ve just completed insulating half the roof of my brew-shed; and it seems to be working!

I drilled four x 2” holes at both ends of the eaves of the shed (to get air-flow), put a stainless steel air-vent on both sides of the holes (to minimise insects getting in) and then stapled “Bubble Foil Insulation” to the fore-and-aft braces in the roof. I also sprayed the cavity with an anti-spider lacquer for long term insect protection.

If the insulation:
  • “Works”, then I can pat myself on the back!
  • “Half Works” then I can do the lower half of the roof.
  • “Messes with the roof”, then I’ve spent +/-£35 that I can strip off and make into something else! Here’s hoping it works!
Depending on the shed, it may be easy to insulate your own and increase the available space!
:hat:
 
I’ve just completed insulating half the roof of my brew-shed; and it seems to be working!

I drilled four x 2” holes at both ends of the eaves of the shed (to get air-flow), put a stainless steel air-vent on both sides of the holes (to minimise insects getting in) and then stapled “Bubble Foil Insulation” to the fore-and-aft braces in the roof. I also sprayed the cavity with an anti-spider lacquer for long term insect protection.

If the insulation:
  • “Works”, then I can pat myself on the back!
  • “Half Works” then I can do the lower half of the roof.
  • “Messes with the roof”, then I’ve spent +/-£35 that I can strip off and make into something else! Here’s hoping it works!
Depending on the shed, it may be easy to insulate your own and increase the available space!
:hat:
My shed is a 8x6 painted black and sheltered on 2 sides , kept other liquids in their in past and being in Devon by coast it's rare we go below zero , even then I think it's stayed above in shed , will look into some insulation to help minimise temp swings , let us know how it goes , cheers
 
Took some photos yesterday of the insulation - which seems to be working to about 70% of what I want. (I may have to insulate the left hand side and the back wall if it gets any warmer.)

5DE59822-5BD7-4374-9B06-40415594F37D.jpeg
868147D6-D54A-4BE0-AC3F-D73A9550B3E1.jpeg


The back wall faces SW and gets warm in the afternoon, as does the left hand side of the roof.

Enjoy.
:hat:
 

Latest posts

Back
Top