Tess Tickle's Brewdays

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I think you can connect Soda Stream to the regulator but there is some sort of adaptor needed. 😁
@Andy44 this is the adaptor that you would need in order to connect a Sodastream bottle to the kind of regulator that would normally connect to a full sized gas bottle.
Obvs any sort of vessel you're pressurising needs a safety valve though athumb..

Sodastream adapter for CO2 Regulator
Screenshot 2021-08-13 at 09.27.11.png
 
Just kegged my mountain IPA, used a couple of the tea strainer things, didn’t work at all as I put too many hops in each, they were about half full when I put them in but completely stuffed when I took them out. Bit of a waste of hops as I can hardly taste the 150g or so I put in.
Think I’ll just live with the gunk next time and chuck them in loose!
 
Here is a short clip lisa, no hop spider just 180g loose pellets, and very little debris that got through the false bottom, pumping into the snub nose.
Hop cone after whirlpool.
 

Attachments

  • 12.MOV
    20.2 MB
  • 21.JPG
    21.JPG
    48.5 KB · Views: 48
I have a spare corny I use to capture fermentation co2 gas I use it for closed transfers purging etc saves quite a lot of co2 instead of hooking up the cylinder I have something like 42 litres of co2 stored just off two vigorous fermentation’s in my conical all rounder.
 
3/12/21

So we've splashed out a little for Christmas, choosing to brew three recipes this month. We have a busy weekend of brewing ahead of us.

I am doing a pale ale today, Jim is doing a stout tomorrow and I'm finishing on Sunday with a vienna lager - this one won't be ready until late January though I think.

Snippets of my brew day will follow this evening - when I've got everything in it's place. 😁
 
So I’m trying to make an English (ish) pale ale.

I started off with 20L of mash water in the Brewzilla.

DCFC7860-F747-48FB-87AF-776D4D2628DD.jpeg


I plonked all my malts in a bucket for ease of mashing in.

7394045A-68C1-4DCE-B90B-662EAF75C01D.jpeg


I made a jar of water salts for the mash and sparge water, separately.

599F2A9E-DD1A-4909-B21E-E76CF38E5F9D.jpeg
0B38E290-99FA-4751-B7A1-17C13CF18356.jpeg


Mashing in

AF190851-50C6-4FEC-B9C0-284B9F52C0CD.jpeg


Early PH reading was 5.3. I was happy with that so left it alone.

60BEC561-46F9-470B-A86C-E31A43014BC9.jpeg


My sparge water temperature.

519A2AE4-BAA6-4D6D-9BE1-E425FA15D9BD.jpeg


The sparge.

6AFAF100-25DE-4360-B290-45E9679F6889.jpeg


Trying not to waste any wort so collecting as much as I can.

FCD3DB9B-36FD-4023-9A78-55E14C5A06E2.jpeg


Almost boiling.

6012F83E-5BE2-4A02-B4B1-9B342DB62C86.jpeg
 
Last edited:

Latest posts

Back
Top