Mash Tun Ball Valve

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Brew_DD2

Mint Choc Chipster
Joined
May 20, 2015
Messages
3,081
Reaction score
2,597
Location
Dundee
So I acquired a Geterbrewed gift voucher for my birthday and also recently acquired a false bottom. I'm planning to install a ball valve into my mash tun but am a little unsure as to which connectors, washers etc. I'll need to purchase along with it.

I know I'll need a 1/2bsp hose barb but other than that I'm a bit confused as to if I'll need a nipple or a coupler.

Any of you able to have a look on Geterbrewed and give me some advice?

Many Thanks
 
https://www.googleadservices.com/pa...-8b5nYkDG87YUZyVoIHdxVlv3EYCQyuYaAqWsEALw_wcB

https://www.googleadservices.com/pa...WXGcTYrlQsqNhYlsRcMyJWcyOjci2HRQaApnmEALw_wcB

I went for those items. The connectors come with a suitable sealing washer. Some 15mm pipe is required alogwith it. The outlet on mine is about an inch of 15mm pipe with a 15mmx10mm reducer with another inch of 10mm pipe which the hose I happened to have fits on.

That was for a rectangular cool box type mash tun and it works well.
 
Back
Top