Maxi chiller

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
If you are only using the flash line chiller, not the python, do you still need to fill it with water?
Yes, the water forms the ice bath that keeps the beer line cool, also the python is on most of the time. You will need to loop the python line exit and entry together if leaving it running, otherwise you'll have water all over the place, alternatively you could disconnect the python :thumb:
CIMG2351250x188.jpg
CIMG2361250x188.jpg

Steel lines are beer lines. Personally if using with a controller I'd use the python line and get the controller to switch the python pump ;)
 
Right then V, going on your advice, I've built this test rig, pending procuring a chiller!

The silver grey unit is my HERMS (heating) and the yellow bucket represents the chiller (still to procure).
The two bronze units in line are 1 way check valves.



I'm totally amazed, it bloody works! :eek:
 

Latest posts

Back
Top