Push fit reducer/splitter

[soupdragon]

Hi all

Is there such a thing as a push fit reducer/splitter?

I know there's other ways to do it but one of these would be my easiest option. I want to split a standard gas into two but reduced to standard beer line diameter for flexibility. I need to buy a couple of things whichever way I do it.
I've seen splitters and reducers but nothing that combines the two.

Cheers. Tom

 

[Redwulf]

So 3/8" gas line from the reg to the splitter and 5/16 coming out of the splitter.

I've not seen a 3/8" to 5/16" splitter reducer...

Get a 3/8 splitter and then get a 3/8 stem reducer that takes a 5/16 tube. Might be slightly cheaper to get in line reducers and do 3/8 in and out of the splitter for an inch or two and then through the reducer to 5/16"

 

[soupdragon]

My desired output is 3/16. I've got a 3/8 equal splitter but would need to get 2 stem reducers. Not even thought about pricing them up as yet, wanted to exhaust the reducer/splitter option first. If it's a no go then stem reducers would have to do. Just thought it'd be more straightforward to bypass them with the splitter thing

Cheers. Tom

 

[Redwulf]

Ahh 3/16 you might struggle I know my restriction kits just uses stem reducers at either end and plug into a 3/8" fitting.

 

[Buffers brewery]

If there is one, it’s hiding from Mr Google! Best bet is a couple of stem reducers I recon.

https://www.amazon.co.uk/John-Guest-Reducer-inch-supplied/dp/B005VPLUDU

 

[soupdragon]

Waiting on Mr postman now. 2 stem reducers from eBay, £4 delivered :-)

Cheers. Tom