Recent content by Jenno

Cheers sounds like a good starting point - do you think that would hold if staves were used instead of cubes(have read that having more end grain with cubes might not be the best)

Anybody??

Hi All, So I've had a carboy sitting around for a while that I've had earmarked to start brewing some long term sours in and with my second child due in a few weeks I thought it would be cool to brew a Flanders Red and ferment with the WYeast Roeselare blend and serve up on her first birthday...

That's my first thought of where it could be leaking so will see how the jointing compound goes and if no luck will grab some of the yellow ptfe tape.

Definitely sure - I just have the tubing incoming from the primary reg (all leak tested and primary reg holds pressure for 24 hours) and a stop valve and plug on the outlet of the secondary reg. I've broken down the reg and tried some Fernox LSX on the gauge and grub screw and waiting for that...

Out of interest what is wrong with the loctite thread sealant?

Oh that;s interesting! if that's the case I wonder if I could use loctite 567 which I've got on hand. Also I am right in thinking that the regulator should hold pressure and not drop right?

Hi All, I've recently purchased a set of the Shako regulators that @peebee highly recommends. I have set up however when testing by pressurising and then isolating the regulator it is losing approximately 3psi over 24 hours. I have sprayed with soapy water and can't find any leaks but as it...

Hi All, I've been doing my head in trying to trace a gas leak in my Keezer and after stripping back to just the primary regulator with a tapped outlet with stopper on the outlet there is still a leak. I have tested the usual way by pressurising the system turning the valve on the CO2 tank off...

Would love either of the 100 or 106 PIDs!

Yes please! Count me in. Sent from my iPhone using Tapatalk

Those look like a great deal, any experience with the quality?

Definitely! Been there done that, not to worried about the price (within reason) if it's going to be good quality and lasts.

Hi Guys, I'm an Aussie that has been in the UK for nearly a couple of years now, I started brewing back in OZ and now need to start brewing again!! I'm in the process of getting a setup back together and now need a pot. I am thinking 50L will give me the most flexibiilty when I might...