stc 1000

[Dronfieldbrewer]

Eh up
Does anyone know what the F numbers are all about on the STC 1000.

 

[nobyipa]

F1- set the desired temp level.
F2- set the temperature variance.
F3- set the compressor delay.
F4- temp calibration value.

PROGRAM LIKE THIS

Press and hold the 's' button for 3 seconds. The screen will display 'F1'. Press the 's' and up arrow button together until you reach your desired temp.
Then press the up arrow an the screen will display 'F2'. Press the 's' and up arrow again to pic your desired variance and then press the up arrow on its own. Screen will now display 'F3'. Repeat the process to reach desired compressor delay and then press up arrow to show F4. Then repeat process again to set desired calibration value.
Once you have finished then press and release the standby button once to save your settings.
In normal operating mode, press the up arrow once to display your stored set temperature and the down arrow to show your stored set variance.

 

[Dronfieldbrewer]

F1- set the desired temp level.
F2- set the temperature variance.
F3- set the compressor delay.
F4- temp calibration value.

PROGRAM LIKE THIS

Press and hold the 's' button for 3 seconds. The screen will display 'F1'. Press the 's' and up arrow button together until you reach your desired temp.
Then press the up arrow an the screen will display 'F2'. Press the 's' and up arrow again to pic your desired variance and then press the up arrow on its own. Screen will now display 'F3'. Repeat the process to reach desired compressor delay and then press up arrow to show F4. Then repeat process again to set desired calibration value.
Once you have finished then press and release the standby button once to save your settings.
In normal operating mode, press the up arrow once to display your stored set temperature and the down arrow to show your stored set variance.

Many thanks