Removing mold from the brass valve fitting

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hill1649

Active Member
Joined
May 29, 2010
Messages
76
Reaction score
12
Hi all,

I've been given a couple of 2 gallon barrels, the S30 valve nut of one of the lids has mold on it - any idea how to clean this up? Is it possible to salvage it? How do you sanitise these valves? Many thanks.

Lorna

Moldy valve.jpg
 
I've just done the same thing. I put mine in to a small cup of Pepsi Cola for a couple of days. It came out looking like new....
 
Tomato ketchup does well too. Keep brass away from chlorine-based sanitisers!
Thanks. Presumably the no rinse sanitisers are okay for sterilising? they appear to be acid based rather than chlorine based.
 
I recently bought a new one and the product leaflet warned against Sodium Metabisulphate as well. I seem to remember I cleaned one up with Brasso - but the Pepsi tip sounds worth knowing!
 
I recently bought a new one and the product leaflet warned against Sodium Metabisulphate as well. I seem to remember I cleaned one up with Brasso - but the Pepsi tip sounds worth knowing!
I'm using Coca Cola - seems to be doing the business.

I'm not sure what the problem is with using Sodium Metabisulphate???
 
It's unlikely to be mould but verdigris, a corrosion product of the brass. You certainly don't want it in your beer. Years ago I used to keep my pressure barrels "sweet" by putting a bit of sodium metabisulphite solution in there. It always turned the brassware green so stopped doing it. They'll clean up fine. The worst was with the earlier aluminium fittings.
 
It's unlikely to be mould but verdigris, a corrosion product of the brass. You certainly don't want it in your beer. Years ago I used to keep my pressure barrels "sweet" by putting a bit of sodium metabisulphite solution in there. It always turned the brassware green so stopped doing it. They'll clean up fine. The worst was with the earlier aluminium fittings.

Thanks. Yes, on closer inspection it wasn't mold but corrosion. Does look like it's cleaning up nicely, if slowly. Thankfully, none of my other fittings are looking damaged!
 
A wire brush would clean it.

Brass is naturally anti-bacterial; so, when you sanitise your equipment, just cover the brass with a smear of vaseline or food-grade grease. Not the vaseline you keep upstairs.
 
Last edited:
A wire brush would clean it.

I was thinking about using some wire wool on it - but that means digging around in the garden shed and there are huge spiders in there! If the Coca Cola doesn't work I'll venture in!
 
I was thinking about using some wire wool on it - but that means digging around in the garden shed and there are huge spiders in there! If the Coca Cola doesn't work I'll venture in!
Buggger that for a game of soldiers. Leave it to the spiders and use a Brillo pad.:eek:
 

Latest posts

Back
Top