Bottle wand very slow

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

danmac

Regular.
Joined
Feb 20, 2021
Messages
258
Reaction score
66
Does anyone else think the bottle wand is very slow or am I doing something wrong
 
Don't all shout at me, but I fill my bottles with a jug and a funnel (horror of horrors!), and I don't consider it has ever caused me any problems! :laugh8:
 
A couple of things to add...bottles with a domed base can be awkward to get the mechanism depressed and don't push the lid down tight in your bottling bucket!
Indeed! Unfortunately I have lots of bottles with domed base
 
On mine if it is fully pressed it is slow, if it is half pressed it is faster.
Seconded.
Made a Festival Bonfire Toffee kit which contains oak fines. They clogged right up. Never an issue.with wine (probably due to 2 part finings). Was like a morse code telegraph operator tapping away. Didnt realise until I opened the bottles and had Russian roulette gushes, nucleating on stray sawdust.
 
Seconded.
Made a Festival Bonfire Toffee kit which contains oak fines. They clogged right up. Never an issue.with wine (probably due to 2 part finings). Was like a morse code telegraph operator tapping away. Didnt realise until I opened the bottles and had Russian roulette gushes, nucleating on stray sawdust.
I recently brewed a Festival Oaked Apple Cider kit and it had oak chips and dried apple pieces floating around in the brew. I got some Muslin cloth and a elastic band and after a 10 minute boil and a few minutes in Chemsan I attached the Muslin cloth to the tip of my auto siphon and siphoned the cider over to a bottling bucket. It managed to filter out the crud. I also had muslin cloth on the inside of the bottling bucket at the tap. So it was double filtered. Thankfully it didn’t clog up the bottling wand as I had feared. A bit overkill but it worked.
 
Every so often take teh end off and the spring and make sure its all clean and no **** in there.. even if you sanitise it, you will find from time to time some crud / break or hop material can end up in there.
 
I'm sure this is a silly question, but are you making sure there's not a vacuum forming in your FV? If you have a tight fitting lid to your FV the flow will eventually stop until you either release the lid a touch to let some air in or pump in some CO2 to help push the beer out - there are lots of threads about the latter in the forum.
But like everyone else, I find the flow is better when only half pressed down
 
A couple of you have mentioned using Festival kits. I use the little bag which comes with the Festival beer kits on the end of my siphon tubing (opposite end to the bottling wand, obvs wink... ) and I find that this reduces the amount of crud that is transferred which could jam up the wand.

I use a bag on the end of the tubing when transferring from the fv to the priming bucket and then another on the tubing with the bottling wand, effectively double filtering. I find I get very little hop debris etc transferred to bottles.

I've also found that bottles with domed bottoms and PET bottles with dimples bottoms (eg coke bottles) are sometimes difficult to fill. You have to find the sweet spot to position the bottling wand to get a decent flow.
 

Latest posts

Back
Top