tap to maxi 110 to sanky

[farmer brown]

Hey all

Im looking to set this tap up with my maxi 110 cooler and keg with sanky connecter.

1) Can you tell me what john guest connectors + pipe work Ill be needing :wha:



Many thanks!

 

[Buster]

You will struggle with that tap configuration as its madefor a Cornelius Keg fitting Quick Disconnect, if you have allready bought the tap then you will have to discard half of it and cobble something together on the back of the tap. If you havent allready got it then I suggest you get a standard 3/8" Dalex tap which will have a 3/8" connector allready on the back which will connect to standard 3/8" beer line which also connects to your Sankey S beer out via a 1/2" BSP to 3/8" John Guest fitting ....again a standard fitting. :thumb:

 

[farmer brown]

Thanks for that Buster
I have this tap on my corny keg and was going to use it for my keg setup so Ill buy a proper tap.

Would the 3/8 version of this work ok?

http://www.hopandgrape.co.uk/public/det ... RE20054218

The rest seems pretty straight forward.. Many thanks!

 

[farmer brown]

Sorry, is this the correct JG fitting?

John Guest 1/2" (15mm) BSP x 3/8" Push Fit Tap Adapter

 

[Buster]

Yes, that is the correct JG fitting for the Gas in and Beer out on your Sankey Connector and that is also a good tap to use, make sure when you order its the 3/8" one. Get yourself some 3/8" beer and gas line and your good to go :thumb: .

 

[farmer brown]

Great.. Ill get ordering

Thanks Buster

: