Angle Grinder Shopping

[Loetz]

I'm getting ready to do my thermobox conversion, but I don't know which tools to buy.

I'm thinking about buying this angle grinder:
http://www.amazon.de/dp/B001EX2V1S/?tag=skimlinks_replacement-20

But I don't know which disks to get for it for cutting the bottom out and for trimming down this thingy:

Do any of you have any ideas or suggestions?

 

[Muddydisco]

These :thumb:

http://www.amazon.de/dp/B000VE2LH0/?tag=skimlinks_replacement-20

They are actually on the suggestions on the angle grinder page

They a 1mm thick and designed to cut stainless

 

[MacKiwi]

I managed to convert my thermo-box without using an angle-grinder. I used two hole-saws that I already had...

Very tidy, but damn fiddly...

 

[Vossy1]

Great job MK I thought about doing it like that but knew my patience would get the better of me :P :lol:

 

[Loetz]

Thanks for the tips, I bought the stuff from amazon and I'll do it that way.

 

[MacKiwi]

Hope it goes well! One tip - if you use a hex nipple as a bulk-head fitting like I did, it makes things easier if you drill it out so that you can slide the 15mm pipe all the way through from the outside.