RAPT Temp Controller

[private4587]

I bought my controller from Aliexpress as they weren't available at the time in the UK. What I was wondering if anyone knows is if it is possible to open the case easily and change the cabling to suit UK plugs instead of having to use adapters?

 

[LeeH]

I opened up my inkbird to modify, I doubt it will be difficult if you can use a soldering iron.

 

[gyurmaember]

If you open it up, can you please upload photos of the relays? I have a very strong opinion what needs proofing.

 

[Matt_W]

I’ve got one, I just cut the ends off and added a 3 pin plug and a couple of trailing sockets.
The inside was a bitch to change the orientation of the unit, everything’s really tight in.
From memory the cables are soldered to the board.

 

[private4587]

I’ve got one, I just cut the ends off and added a 3 pin plug and a couple of trailing sockets.
The inside was a bitch to change the orientation of the unit, everything’s really tight in.
From memory the cables are soldered to the board.

thanks will do the same

 

[MashBag]

Can I ask why the RAPT and not an inkbird (or somthing else)