In my experience the yeast that comes with this kit does not settle very well.Quick question
IPA been in the Pressure Barrell for a few weeks now, will be in a few more yet.
I'm tempted to take it camping with me in a few weeks, question is will this make the beer cloudy again mixing all the sediment up during transportation?
Thx
Thanks, not sure what a hydro tube is where will I get one, any brew shop?
That's what I was using.wilkos mate. beer section
http://m.ebay.co.uk/itm/50ml-Plastic-Scale-Hydrometer-Test-Jar-Tube-Bar-Homebrew-Beer-Wine-Making-/262504437980?nav=SEARCH
itl look like this but wilkos are cheaper by a quid or so
This beer is very hoppy compared to most, especially if you used all of the hops.Well guys, I tried my first test bottle last night after about 10 days in the bottle, to say I was unimpressed would be an understatement. it was very bitter, and under carbed. I will let it stay in the warm for another week to see if the carb problems sort themselves out. think I made a boob with the hops, in that i added them to boiling water to make a tea, then added it and the hops to the FV. think I may have added them to the water when to hot and ended up bittering my beer!
I can recommend the Youngs American Pale Ale. I actually prefer it to their AIPA.Thanks for the help and questions you answered, only question now is another batch of this or something different?
Been in the PV since the 5th August now at around 22 degrees.
Should I put it somewhere cooler now for a while and if so what temp?
Would it effect the beer in anyway now or the csrbonation if I took a tester pint?
Have you tried it? Is it clear? It should be carbonated. If so, its ready to drink in my experience of this beer. If its not yet clear put it in the coolest place you have since it will help it to clear plus it benefits from being served cool say around 10*C.Yes its dry hopped and fermented
I mean its been conditioning in the pressure barrel since the 5th August at 22 degrees.
So wondered if I should put it somewhere cooler now to clear?
The carbonation will reduce as you draw off the beer. However the drop in pressure after you have drawn a pint is hardly noticeable. When there is not enough pressure to dispense you then either regas using CO2 (bulb or cylinder) or reprime. However AIPA beers benefit from high carbonation so you may want to keep the carbonation up if you have CO2.No not tried it yet.
Thats what I was asking.
Will it effect the carbonation in anyway if I draw a pint from it now, or does it keep the pressure fine in the barrel
I am guessing it will be a totally diferent beer in a month or two, make sure you save some so you can taste what it should taste like when it is properly matured.This was the first kit I made and have just started drinking a few bottles. As it was my fist kit, I made a few mistakes! Firstly, the kit arrived with the LME package leaking slightly, there was a tiny hole in the bag and some of the extract had crystallized over the hole. As I was super keen to get started I brewed it anyway!
The fermentation got underway really quickly and was finished after about 6 days. So I dry hopped on day 7 and bottled on day 9. I propably should have waited, but like I said.... my first kit!
The bottling didn't go well. I tried to transfer into a bottling bin using a spigot and syphon hose. The hose didn't form a good seal around the spigot so a lot of air got into the beer. It was also a very hot day, so a little bit of sweat dripped in there too!
I drank the first bottle after about 5 days conditioning at room temp, and then 48 hours in the fridge. The beer was really hoppy, the best way I could define the flavours is that they were sharp with a bitterness that hit after swallowing. After a few more days conditioning and another 48 hours in the fridge the beer has mellowed somewhat and is much more rounded. It's still a very hoppy beer, but beginning to take on a less severe character.
I would recommend this to any hop heads out there, it's just about at the limit of bitterness for me. My girlfriend hates it!
Enter your email address to join: