Conditioning grain

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Oneflewover

Landlord.
Joined
Jul 10, 2016
Messages
2,364
Reaction score
1,823
Location
Dorsetshire
Does anyone else do this? I've been conditioning grain for a good long while now, but wondering if it is something I can cut out of my brewday. Main benefit for me is that husks are kept intact and that really helps avoid stuck or slow sparges. It also pretty much eliminates dust when milling.

I don't want to go back to buying crushed grain as I like the control I get from milling my own, plus I only brew once per month and I do think whole grain keeps better. In the grand scheme of things, then, conditioning it isn't hugely time consuming, but it would be good to strip out all unnecessary steps.

Any thoughts? Cheers
 
My understanding is that in "malt conditioning", a fine spray of water is applied to the grain as it makes its way to the mill. My sources say about 1 quart of water for every 100 lbs of malt. Wet milling calls for soaking the malt in warm water for about an hour before milling. Steep conditioned milling involves the warm steep but for only about 60 seconds before milling. The goal of each of these methods is to make the hulls pliable so that they aren't pulverized and form a better grain bed for the lauter after mashing. It also has the happy effect of reducing dust to nearly nil during the process.

If you have a mesh basket or large colander and use the last method, that may kill all of the birds with a single stone.
 

Latest posts

Back
Top